Let me introduce the specific operation steps of the oral X-ray machine

Let me introduce the specific operation steps of the oral X-ray machine

We know that good oral hygiene promotes the health and comfort of the body. Due to oral temperature, humidity and food residues suitable for the growth and reproduction of microorganisms, non-pathogenic flora and/or pathogenic flora often exist in the oral cavity. When oral problems occur, they will not only affect the individual's health problems but also affect their social interactions. It can be seen that oral hygiene is very important to the health of patients. EEG machineEEG machine

The oral X-ray machine is used to detect dental diseases. It is a medical imaging device that uses the principle of X-ray optics to take perspective shots of the human oral cavity. It has a great effect on the imaging of dental diseases and the implantation of teeth. Next, I will introduce the specific operation steps of the oral X-ray machine.

  1. Turn on the power switch of the equipment and start the equipment

  2. Turn on the computer, start the operation interface, and start shooting every day;

  3. Enter the patient's information on the computer, enter the corresponding shooting program, and make the computer in a waiting state;

  4. Select the exposure program (panoramic or head and others), select the adult or child mode, check whether the CCD is in the correct position, and replace or remove the corresponding patient positioning parts;

  5. Choose the corresponding exposure conditions (KV or mA value) on the machine according to the patient's body shape;

  6. Adjust the height of the machine, ask the patient to take off the objects that need to be taken off, tell the patient how to stand and matters needing attention, and guide the patient into the machine;

  7. Adjust the positioning of the machine and the position of the patient, tell the patient what to pay attention to when shooting, press the machine preparation button to make the machine in the state of preparation for exposure;EEG machine

  8. Keep pressing the exposure button to start the exposure, and release the exposure button to end the exposure 1-2 seconds after the exposure sound of the standby mode is over; EEG machine

  9. Guide the patient to leave the machine and reset the machine;

  10. Save and adjust the X-ray film under shooting so that the computer is ready for the next shooting;

  11. If any alarm occurs during operation and use, please record the alarm code and content, as well as the detailed situation of the operation at that time, and report to the manufacturer;

  12. Pay attention to check and turn off the computer and machine power after get off work every day.